Trees require a lot of maintenance for them to grow healthily. Although the procedure of maintenance involves a lot of activities, one of the most important activities is pruning, also called trimming. Trees that grow naturally in the forest do not need much intervention in the form of pruning because this task is handled naturally. On the other hand, landscape trees need more care so as to keep their aesthetics as well as structural integrity. Here are facts regarding Round Rock Tree Trimming.
It is crucial that the biology of trimming is understood well in order for trimming to be handled properly with no damage happening to the tree. Handling the task wrongly may cause serious damage to the plant whose recovery may not be possible throughout its whole lifespan. Also, the damage can considerably shorten the lifespan of the tree in question.
During trimming it is crucial to pay attention to which branches to retain and the ones to be removed. The potential of the tree to grow is affected with each cut in some way. As such, no branch is to be removed without a good reason. This is why paying attention to the 3 reasons for branch removal is important. The three are removing dead branches, improving form, and reducing risk.
Additional reasons for branch removal include increasing the amount of light and air penetration to the crown. For older trees, branches are removed for corrective or preventive reasons. The reason for this is because it has been proven that routine thinning really does not help with health improvement. Thoroughly inspecting the concerned tree is important before the job is started.
One should start the inspection from the top of the tree downwards to determine which branches should be removed and which ones should be retained. The pruning should also be started from top downwards. This prevents the removal of branches that should not be removed. As a rule of thumb, one should not remove more than a quarter of all branches on the plant.
As one trims, they should give more focus to branches that re too big in relation to the trunk. Only branches that are less than 30 percent in width should be left. Removing oversized branches reduces the risk of collapse during inclement weather. On deciduous plants, only branches that sit less than 30 percent of the total height of the tree should be removed.
Most trees usually have a single trunk. As such, one should take time to identify which one is the main trunk in case there are multiple trunks. Before one moves to prune for form, they should remove any defective parts that can be identified. Cuts that result from the process can be painted to improve aesthetics. However, it is important to note that painting does not prevent decay in any way.
A person must assemble all the necessary tools before starting the job. The tools must be in proper condition and well sharpened. For branches that are so high a pole pruner would do. All major work that needs to be handled must be entrusted to a professional arborist.
It is crucial that the biology of trimming is understood well in order for trimming to be handled properly with no damage happening to the tree. Handling the task wrongly may cause serious damage to the plant whose recovery may not be possible throughout its whole lifespan. Also, the damage can considerably shorten the lifespan of the tree in question.
During trimming it is crucial to pay attention to which branches to retain and the ones to be removed. The potential of the tree to grow is affected with each cut in some way. As such, no branch is to be removed without a good reason. This is why paying attention to the 3 reasons for branch removal is important. The three are removing dead branches, improving form, and reducing risk.
Additional reasons for branch removal include increasing the amount of light and air penetration to the crown. For older trees, branches are removed for corrective or preventive reasons. The reason for this is because it has been proven that routine thinning really does not help with health improvement. Thoroughly inspecting the concerned tree is important before the job is started.
One should start the inspection from the top of the tree downwards to determine which branches should be removed and which ones should be retained. The pruning should also be started from top downwards. This prevents the removal of branches that should not be removed. As a rule of thumb, one should not remove more than a quarter of all branches on the plant.
As one trims, they should give more focus to branches that re too big in relation to the trunk. Only branches that are less than 30 percent in width should be left. Removing oversized branches reduces the risk of collapse during inclement weather. On deciduous plants, only branches that sit less than 30 percent of the total height of the tree should be removed.
Most trees usually have a single trunk. As such, one should take time to identify which one is the main trunk in case there are multiple trunks. Before one moves to prune for form, they should remove any defective parts that can be identified. Cuts that result from the process can be painted to improve aesthetics. However, it is important to note that painting does not prevent decay in any way.
A person must assemble all the necessary tools before starting the job. The tools must be in proper condition and well sharpened. For branches that are so high a pole pruner would do. All major work that needs to be handled must be entrusted to a professional arborist.
About the Author:
Round Rock tree trimming services provide customers with everything they need to keep their gardens in tip top condition. To read our customer reviews now click here http://www.keepaustingreen.com/tree-services/tree-trimming.
Aucun commentaire:
Enregistrer un commentaire